![]() It too, one will find, has two plastic slots on the botton which the sponge will have to be returned into. It too is very delicate and be careful not to rip it. With the power still on and the printhead to the far left, I was able to very gently (with the same needlenose Pliers) remove the sponge under where the printhead was parked. ![]() This moved the print head to the "far left", before the position to change cartridges. The second sponge I removed as follows: With the power on, I pressed the ink cartridge removal light (red) (far left) once. Remember to what position it was before removal, so there is no problem when you try to replace the sponge after cleaning. ![]() It has ink residue in it so use gloves if necessary and upon removal place the sponge on a paper towel folded in triplicate so the ink does not bleed through the towel. The sponge is very delicate, so be very gentle in removing it. One will see the two center plactic guides within this lane. I first used a pair of needle nosed pliers and carefully took out the sponge type pad which is along bottom of the printhead travel lane. ![]() I opened the door as if to change the ink cartridges. I modified a little what Worldvet had done. SOURCE: Need To Replace The Waste Ink Pad on my Epson Stylus C66 ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |